Paneles solares fotovoltaicos Jinko Solar
Jinko Solar Eagle Plus 72
340 - 360 Watt
Mono Crystalline Module
Positive power tolerance of 0~+3 %.
4 Busbar Solar Cell:
4 busbar solar cell adopts new technology to improve the efficiency of modules, offers a better aesthetic appearance, making it perfect for rooftop installation.
High Efficiency:
Higher module conversion efficiency (up to 18.57%) benefit from Passivated Emmiter Rear Contact (PERC) technology.
Extended PID Resistant:
Limited power degradation of Eagle Plus module caused by PID effect is guaranteed under extremely strict testing condition (85℃ / 85% RH, 500 hours) for mass production.
Low-light Performance:
Advanced glass and solar cell surface texturing allow for excellent performance in low-light environments.
Photovoltaic Solar Panels
Jinko Solar
Quito, Ecuador, Sudamerica
Severe Weather Resilience:
Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal).
Durability against extreme environmental conditions:
High salt mist and ammonia resistance certified by TUV NORD.
Linear Performance Warranty
10 Year Product Warranty
25 Year Linear Power Warranty
ISO9001:2008、ISO14001:2004 OHSAS18001 certified factory.
IEC61215, IEC61730 certified products
AMPS Isc
Short-circuit Current
VOLTS Voc
Open-circuit Voltage
VOLTS Vmp
Maximum Power Voltage
AMPS Imp
Maximum Power Current
Specifications
Modelos
JKM340M-72(Plus)
JKM345M-72(Plus)
JKM350M-72(Plus)
JKM355M-72(Plus)
JKM360M-72(Plus)
17,52
17,78
18,01
18,31
18,57
Specifications
Operating Temperature(℃)
Maximum system voltage
Temperature coefficients of Pmax
Temperature coefficients of Voc
Temperature coefficients of Isc
Nominal operating cell temperatura (NOCT)
-40℃~+85℃
1000 VDC (IEC)
-0.39%/℃
-0.29%/℃
0.05%/℃
45±2℃
Mechanical Characteristics
Cell Type
Mono-crystalline PERC 156×156mm (6 inch)
Dimensions
1956×992×40mm (77.01×39.05×1.57 inch)
Weight
26.5 kg (58.4 lbs)
Jinko Half Cell module technology
Amount of electrical current,By using half-cells, the electrical current ( i ) flowing in each busbar is halved. Therefore, the amount of internal losses in a half-cut module is 1/4 of a full sized cell module.
Less Shading Loss
Shading loss of half-cell is much better than normal module in certain shading conditions.
Half-cell technology
Under the same shadow condition, the power loss of half-cell component is less than that of the full-cell component.
Low Working Temperature
Apple-to-Apple Temperature measured in R&D PV system in Oct.2017, Half-cell module is around ~2 degrees lower.
Result:
More Power +5%
Jinko Solar Tiger Neo JKM440N- 54HL4R-V
440 W Watts
Monocrystalline module
Positive power tolerance of 0 ~ +3%.
Linear Performance Warranty
15 Year Product Warranty
30 Year Linear Power Warrenty
0.40% Annual Degradation Over 30 Years
SMBB Tecnology
Better Light trapping and current collection to improve maodule power output an reliability
Hot 2.0 Technology
The N-type module with Hot 2.0 tecnology has better reliablility and lower LID / LETID.
Enhanced Mecanical Load
Certified to withstandwind load (2400 Pascal) and snow load (5400 Pascal)
Durability Against Extreme Environmental Conditions
High salt mist and ammania resistence
Dimensions
1762 × 1134 × 30 mm (69.36 × 44.65 × 1.18 pulgadas inch)
Weight
22,0 kg (48,5 libras lbs)
AMPS Isc
Short-circuit Current
VOLTS Voc
Open-circuit Voltage
VOLTS Vmp
Maximum Power Voltage
AMPS Imp
Maximum Power Current